1/24 Scale Interior Windshield/Rear Deck Flashing Lightbar

1/24 Scale Interior Windshield/Rear Deck Flashing Lightbar
Click to enlarge

More images

Click to enlarge
Price: $19.99
Product ID : 1-24-interior


Basic w/ 6 LEDs
Basic w/ 4 LEDs
Basic w/ 2 LEDs
Multi-Function w/ Direct Wire (+$15.00)
Multi-Function w/ Quick Disconnects (+$20.00)


Fits inside any 1/24 scale model and is designed to be mounted either on the front or rear windshield headliner or the rear deck. The dimensions of this lightbar are approximately 45mm long x 13mm wide x 3mm high. All versions below include our Quick Disconnect plug system to allow you to install this into your model without cutting any wires or having to solder! The wiring (total length from lightbar to on/off switch is approx. 10") includes an on/off slide switch and either a coin battery holder or a 9V battery snap to power the lightbar (batteries not included). The entire lightbar is wired up and ready to install out of the package! The default color schemes are listed below for each version, however the lightbars are available in any color schemes you want.

NOTE: This lightbar is designed for 6 to 9 V for proper operation. If you select the coin battery holder, you should use 2 or 3 CR2032 coin batteries in order to provide the proper voltage. A resistor is built into the wiring of the Quick Disconnect System and should not be bypassed or damage to the lightbar will occur.

This style lightbar is offered in 2 versions:

Basic - Includes 6 random flashing LEDs inside of the lightbar for a bright and realistic effect (default version). The default color scheme is red on the drivers side, blue on the passenger's side, and white in the center.

Video example (note: the 8 LED version for 1/18 scale is shown, the 1/24 scale is the same but with only 6 LEDs):

Multi-Function Upgrade - Includes 4 random flashing LEDs and 2 steady burning "Takedown" LEDs. The default color scheme is red on the driver's side, blue on the passenger's side, and two white LEDs. This lightbar has two independant functions: 1) flashing LEDs are activated on one on/off switch, and 2) the steady burning Takedown LEDs are activated on a seperate on/off switch.

Product Reviews

Login or Register to write the first review.