1/18 Scale Code 3 MX7000 Style Flashing Lightbar

1/18 Scale Code 3 MX7000 Style Flashing Lightbar
Click to enlarge

More images

Click to enlarge
Price: $29.99
Product ID : 1-18-mx7000

Purchase

Basic
Deluxe (+$15.00)
Multi-Pattern Direct Wire (+$50.00)
Multi-Pattern w/ Quick Disconnect (+$65.00)
Multi-Pattern Direct Wire w/ Lighting Kit (+$65.00)
Multi-Pattern w/ Quick Disconnect w/ Lighting Kit (+$80.00)
Simulated Rotator Direct Wire (+$75.00)
Simulated Rotator w/ Quick Disconnect (+$90.00)

Description

Fits on any 1/18 scale model and includes generic mounting feet. The dimensions of this lightbar are approximately 63mm long x 16mm wide x 10mm high. All versions below include our Quick Disconnect plug system to allow you to install this into your model without cutting any wires or having to solder! The wiring (total length from lightbar to on/off switch is approx. 10") includes an on/off slide switch and a 9V battery snap to power the lightbar (9V battery not included). The entire lightbar is wired up and ready to install out of the package! The default color schemes are listed below for each version, however the lightbars are available in any color schemes you want.

This style lightbar is offered in 5 versions:

Basic - Includes 7 random flashing LEDs inside of the lightbar for a bright and realistic effect (5 face forward and 2 face the rear). The default color scheme is red on the drivers side, blue on the passenger's side, and white in the middle. Example video of the "BASIC" version:




Deluxe Upgrade - Includes 14 random flashing LEDs inside of the lightbar allowing for a greater customization of colors (7 face forward and 7 face rear). The default color scheme is red on the driver's side, blue on the passenger's side, and white in the center.

Multi-Pattern Upgrade - Includes 12 different realistic police flash patterns that you can select via the push of a button. This lightbar features 16 LEDs (the LED bulb colors of the front LEDs must match the bulb colors of the rear facing LEDs in the same positions) and an external Strobe 3.0 flasher module (60mm x 25mm x 8mm) that powers the lightbar. The default color scheme is red on the driver's side, blue on the passenger's side and two white LEDs. The LEDs in position 1 and 3 must be the same color and the LEDs in position 6 and 8 must be the same color; for example: R-R-R-W-W-B-B-B.

Multi-Pattern Upgrade w/ Lighting Kit - This version includes the same lightbar set up as the "Multi-Pattern Upgrade" with the addition of 6 pre-wired LEDs (each with approx. 10" of wire) attached to the Strobe 3.0 flasher. When the lightbar is activated, two of the pre-wired LEDs will alternate in a wig-wag pattern (suggested use is in the headlights of the model; LEDs are white by default) and four pre-wired LEDs will flash in a strobe pattern (suggested use is in the taillights, reverse lights, or grille of the model; three LEDs are red and one LED is blue by default).

Simulated Rotator Upgrade - Includes 9 different rotating (multiple speeds) and strobe flash effect patterns that you can select via the push of a button. The lightbar features 5 "LED Rotator Clusters" (by default: two red on the drivers side, two blue on the passenger's side, and one white in the center) that combined with the Strobe 2.0 external flasher module (50mm x 19mm x 8mm) generate the rotating effect. All LEDs in a single cluster must be the same color but the color of the entire cluster is customizable.


Product Reviews

Login or Register to write a review.
Reviewed by Maccrage
Maccrage bought "1/18 Scale Code 3 MX7000 Style Flashing Lightbar" on our website
12/10/2018 - 11:52:40 PM
1/18 simulated rotator lightbar
Beautiful and extremely realistic. Installed in less than 10 minutes.