1/18 Scale Bubble/Dome Style Flashing Lights

1/18 Scale Bubble/Dome Style Flashing Lights
Click to enlarge
Price: $14.99
Product ID : 1-18-dome


Single Dome
Pair of Domes (+$12.00)
Simulated Rotators w/ Direct Wire (+$60.00)
Simulated Rotators w/ Quick Disconnects (+$65.00)


Fits on any 1/18 scale model and includes generic mounts. The dimensions of each dome are approximately 11mm long x 11mm wide x 15mm high. All versions below include our Quick Disconnect plug system to allow you to install this into your model without cutting any wires or having to solder! The wiring (total length from lightbar to on/off switch is approx. 10") includes an on/off slide switch and either a coin battery holder or a 9V battery snap to power the lightbar (batteries not included). The dome lightbar is wired up and ready to install out of the package! The default color schemes are listed below for each version, however the lightbars are available in any color schemes you want.

NOTE: This lightbar is designed for 6 to 9 V for proper operation. If you select the coin battery holder, you should use 2 or 3 CR2032 coin batteries in order to provide the proper voltage. A resistor is built into the wiring of the Quick Disconnect System and should not be bypassed or damage to the lightbar will occur.

This style lightbar is offered in 2 versions and 2 configurations:

The 2 available configurations are:

- Single Dome (Red by default)
- Pair of Domes (One red and one blue by default)

The 2 available versions are:

Basic - Random flashing LEDs.

Simulated Rotator Upgrade - Each dome in this version will have an "LED Cluster" in it and is powered by our Strobe 2.0 external flasher module (50mm x 19mm x 8mm) to generate simulating rotator (multiple speeds) and strobe flashing effects; there are 9 different flash patterns in the Strobe 2.0 flasher. All LEDs within the cluster must be the same color, however each cluster can be a different color.

Product Reviews

Login or Register to write the first review.